DIY Archives - Page 3 of 4

The DIY Desk: Part 1

September 6, 2017 18 Comments

This post includes affiliate links. For the full disclosure policy click here.

Ok. This project is way overdue. But in my defense, its a biggie. It literally spans the whole length of our studio space and Im breaking it down into 2 posts! So Im cutting myself a bit of slack. Ha! When we moved into the loft we almost immediately decided the space downstairs “designated” as the bedroom just wasn’t going to work. After checking out the floorplan a bit more we decided it would actually be a great place for a workspace. That also meant finding a new desk solution since the space wasn’t going to look great with our old desks. And being our difficult selves we decided a DIY desk would be most ideal!

Modern Farmhouse Desk DIY

When we unpacked we threw together this makeshift workspace(yes, posting this makes me cringe! #reallife) to get a few things done while we were still scheming. But I think feeling out a space and living in it before committing has saved us a lot of time shuffling furniture. We’ve used these desktops in one variation or another for over 8 years.

I love the flexibility of most ikea pieces and obviously the price tag! These tops included. But after moving into the loft we wanted to bring in a bit more of that industrial feel. These tops do NOT read that way. After searching a few online vendors it was pretty clear we favored the modern farmhouse styles as well. A few hours of Pinterest later we figured we could replicate the look with a few tricks and still use our ikea tops.

Modern Farmhouse Desk DIY

We already had 2 white tops and snagged this faux pine one out of the as-is pile. $7 for a table top? Yes please! Knowing we were going to change the look I didn’t care what the finish was. It just needed to be the right size and still in good condition. Check!

Modern Farmhouse Desk DIY

Once we collected our tops we hit Lowes for some peel & stick vinyl planks. They are much lighter than covering the tops in actual wood, come in a crazy amount of colors, and are easy to cut to size(no power tools needed!). The boxes of planks repeat the same 3-4 prints so we laid them out in the isle to make sure we got a good mix. When it came time to stick these down we made sure to stager the planks and kept the patterns as random as possible. No repeats!

Modern Farmhouse Desk DIY

As for the legs, we just made simple rectangle “frames”. We planned on making these desks a bit taller(more on that in part 2!) so custom legs were the only way to go. The frames are made from 2×2 pine and we had them cut right in the store. Again, we were trying to keep the power tool usage in the loft to a minimum. Once we got the frames together I slapped on a coat of black chalk paint and a coat of clear wax. After it dried for 24 hours I very lightly buffed them. I basically just ran a cloth over the frames once. I wasn’t concerned with trying to buff them into a high shine. The finish on these is actually more of a semi-matte. When people have seen the finished desks they assume the frames are actually powder coated metal.

Modern Farmhouse Desk DIY

Being that we are renting this place Im completely obsessed with protecting the floors. I’ve heard too many horror stories about loosing deposits over a couple scratches… uhmmm no thanks! So we pulled out the felt pads and added them to the corners of the frames. Modern Farmhouse Desk DIY

When we added the frames to the tops we made sure they were completely flush to the edges. This was for both esthetic and functional reasons. A while ago we tore one of these tops apart(cant for the life of me remember why!) and the innards were unexpected. The border is wood and the middle is actually just full of cardboard! Obviously this isnt a sturdy place to attach anything. So keeping that in mind we made sure all our screws stayed within a couple inches of the edge. Using the predrilled holes(where you could attach ikea legs) you can visualize the “safe zone”.

Modern Farmhouse Desk DIY

After the legs and tops were situated I hit the edges with more chalk paint and wax. Again, I did minimal buffing as I was after that semi-matte finish.

Modern Farmhouse Desk DIY

These desks are super light and you can customize them to fit any space. We actually customized our own design to use stacking drawers(again, more on that in part 2!). Essentially we made 3 of these desks and when connected they make a huge L shape that spans the the entire studio space. Its giant but we spend a crazy amount of time in here and its so nice having room to spread out mid project!

Modern Farmhouse Desk DIY

So what DIYs have you used in your workspace? Have you tackled any furniture upcycles? You know I’d love to hear all about it in the comments!

DIY, office, studio

Designing With: Grids

August 21, 2017 18 Comments

This post includes affiliate links. For the full disclosure policy click here.

Over the years there have been a few design “tricks” I’ve repeated in nearly every home we’ve had. Simple grids are one of them and they can be used in nearly every room of your living space. The perk of the “grid” is its ability to make nearly any collection of items look tidy, organized, and and intentional. One way in particular to create a simple grid is with clipboards.

I think my love for clipboards comes from my Sister in Law. In the middle of planning our wedding she reminded me how efficient and official(ha!) they make you feel and my house has never been without them since. In our studio space I use them to organize assignments, budgets, photos, inspirational pieces and more.

Clipboard Grids

Yes, I love Pinterest but it will just never replace a need for an old school “pinboard” in my space. The only bummer about pinboards is they can look messy or cluttered. Making a grid with clipboards and using the surface to contain some of the pieces adds a bit of structure. I also change what is visually inspiring me frequently and using these clipboards makes it super easy to swap items out on the reg. Another perk: using clipboards keeps me from having to poke holes in my photos! #winning

Clipboard Grids

I’ve bought clipboads in bulk from the beginning. You can get them in three or six packs and I’m sure the trusty internet will let you buy them in any other quantity your grid might require. I hang them with clear thumb tacks which is also great when you’re renting because they leave the tiniest holes. If you’re going to clip a crazy amount of goods or you’re hanging something heavy on one of your boards a picture hanger will be a better option. I use this same gallery hanging technique to get these up quickly and spaced perfectly. And hey! Notice what else is in grid form in that post?

Clipboard Grids

Our studio space in the loft is relatively small so a grid of 6 is just enough. Although, I’ve always wanted a space that allows for a full wall of clipboards. How cool would that be?! Maybe in our next space!

Obviously grids don’t always need to be made with clipboards. The loft currently has four different grids throughout the walls all made up of different things. Ive blogged about the ones in our entry and bedroom previously. Clearly its a go-to for me but it can be used in so many different variations I never feel like things are too repetitive.

Clipboard Grids

So, are you using grids in your home? Have another awesome use for clipboards? You know I’d love to hear all about it in the comments!

DIY

DIY Pillow Case Kit GIVEAWAY!

July 21, 2017 24 Comments

This post includes affiliate links. For the full disclosure policy click here.

Happy Friday everyone! What better way to celebrate Friday than a giveaway(que happy dance!)?! I loved working on my last painted pillow case and decided you will too. So I’ve put together a DIY Pillow Case Kit for one lucky winner. Let me tell you all about it! DIY Pillow Case Kit Giveaway

This pillow case can be filled in with any number of colors to work in your space! I used 3 different colors from our new living room palette but the sky is the limit on this project. You could fill every triangle with a different color if thats what floats your boat!

I used a touch of Martha Stewart Fabric Medium in my paints to keep everything pliable so I’ve included a bottle in the kit as well. I’ve used this on projects big and small and it never fails me! Its easy to use and it wont change the color of your paints.

And speaking of paints… you’ll need some brushes to fill those shapes with paint right? Right! So I’ve included a set of those too. I have to admit… Im a total brush abuser. I know my art school professors would just cringe at the poor treatment but I cant help it. Sometimes I mix with brushes, leave them sitting in water, store them on the ledge of the sink…. guess Im just a casual brush owner? So its no wonder I tend to use basic acrylic brushes you buy in bulk. Ha! But they hold up well and I don’t feel guilty if one(or some) get destroyed in the wake of some creativity.

Painted Throw Pillows

Ok! To recap what this kit includes:

-1 printed 18″ x 18″ zippered pillow case.

– 6 oz. bottle Martha Stewart Crafts Fabric Medium.

-1 set Studio Paint Brushes.

Sounds pretty good right?! Right! All you have to do is pick your paints and start transforming your pillow case! So click the link below to enter and be sure to share with your friends! Good luck!

a Rafflecopter giveaway

***UPDATE***

Congratulations Diana P! You’re our winner! Thank you to everyone that entered, we had such a great time putting this together. And remember you can still shop these products on Amazon by clicking the links directly in the article.

before & after, DIY, living room, upcycle

Painted Throw Pillows

July 19, 2017 13 Comments

This post includes affiliate links. For the full disclosure policy click here.

If you’ve been here recently you already know I have piles of throw pillows to keep my comfy level maxed out. You may also know I’ve painted throw pillows before. But after getting my hands on a new design for our living room I was itching to use those fabric painting tricks again. These painted throw pillows have a completely different feel than my first attempt but I think they are just as successful!

Originally, I ordered these pillow cases to use as is. And they did live happily on our wicker arm chair for some time. But after adding the throw blanket pillow cases and seeing how punchy the colors were I knew this pillow case needed something to liven it up!

Painted Throw Pillows

When I was considering how to add those punches of color I was reminded of star patterned quilts and adult coloring books. Both of them have negative space which I wanted to replicate to keep the design from getting too busy. I started playing with options in my sketch book and made sure the colors matched up with the other pieces already in the living room.

Painted Throw Pillows

Once I got the pattern mapped out and the colors finalized I set up for painting. The only prep you really need to do is wash/dry the pillow case and place a magazine(or other barrier) inside. This keeps the paint from bleeding through to the other side of your pillow case. You can also add a small amount of fabric medium to your paints. This will keep the painted sections pliable.

Painted Throw Pillows

I used a soft medium sized brush to fill in the larger portions of the design. This helped get most of the spaces filled quickly. I later filled in the edges with a small flexible brush. The paint will get a bit watered down in consistency from the fabric medium. Although, I found using a damp brush also helps with fluidity. This was mostly helpful when I was working on the edging. Be sure to add water sparingly as it may make your paint “bleed”. Painted Throw Pillows

It only took a few Netflix reruns to fill in the design and I think the pay off was well worth the time. So another throw pillow success in the books! Ha!

Painted Throw Pillows

Have you tried any throw pillow DIYs lately? Painted any fabric? Tell me all about it in the comments!

Painted Throw Pillows

before & after, DIY, upcycle

3 Simple DIYs

July 14, 2017 20 Comments

This post includes affiliate links. For the full disclosure policy click here.

As much as I’d like to design and create all the decor and furniture in our homes from scratch its just not realistic. On the other hand, plucking something off a shelf and bringing it home to use “as is” is pretty rare. So generally I do a little of both. Some projects are more involved and some (like I’m about to share) are very simple. I promise it doesn’t always take a great deal of time or skill to customize your decor and I’ve got 3 simple DIYs to prove it!

Paint.

Its generally my go-to when I want to alter a piece. Its inexpensive, nearly limitless in options/colors, and you can add it to pretty much any surface. I picked up this awesome wood planter at Target to update my bedroom plant scene. I loved the raw wood and it fit perfectly in my copper plant stands. Except… it just… needed a liiiiiiiiil somthin…ha!

3 Simple DIYs

After placing it next to the other pot I was using I figured I could pull some of that stripe-y goodness and make them look coordinating without actually matching. I threw on a couple wraps of painters tape and filled them in with craft acrylic. Since the plant will live inside a liner Im not concerned with moisture getting to the paint and didn’t bother with any sealer. Adding simple painted patterns or stripes is a quick and easy way to get some of the colors you want in your space on your decor.

3 Simple DIYs

2. Ribbon.

Ribbon, twill tape, twine, yarn…. basically anything you can wrap and tie! I may or may not have a crazy amount of ribbon(and the like) from my days working at both a craft store and then fabric shop. So it shouldn’t be a big surprise this is another quick trick I use often. Again, the variety factor is amazing with these materials and you can generally find something that works with the vision you have for your space. Another perk about simply tying or wrapping something up is the zero damage factor. You can embellish something and later on down the road change or remove your addition to suit another room or design.

3 Simple DIYs

This was truly as simple as: wrap, knot, and trim. Its not a crazy makeover but repeating that white stripe makes it visually tie in with the rest of the room juuuuust a bit more. Not all upgrades need to be big to make a difference!

3 Simple DIYs

3. Washi Tape

Speaking of zero damage, lets talk tape! Washi tape that is. You can add this to so many surfaces and it will peel right off whenever you decide your done with that look. The last time I hit the craft store there was a whole section dedicated to washi tape so the possibilities here are pretty fab. I’ve used washi tape on quite a few projects now and I will say it does better on smooth surfaces. Surfaces like glass work especially well so when it was time to upcycle this old candle holder into a planter I knew tape was going to be my quickest bet. Also, you can layer your washi tapes to create your own patterns and designs. Yay for getting bonus tapes!

3 Simple DIYs

And you can finally keep your collection on display in these adorable dispensers(yes, Im totally obsessed!).

3 Simple DIYs

So are you a customizer? Have you livened up a new piece? Or upcycled an old treasure? Tell me all about it in the comments!

DIY, living room, loft life, plant lady

Marbled Planters

July 11, 2017 18 Comments

This post includes affiliate links. For the full disclosure policy click here.

I titled this “Marbled Planters” but honestly it could really be “Marbled Anything”. I promise once you do this project you will be looking around wondering what else you could pour, swirl, and dip! Its so addictive you guys! And it only takes a few(very inexpensive!) supplies that you probably already have on hand. Marbled Planters

If you have a planter that has sections you’d like to mask off use painters tape. I wanted to keep the “raw edge” on my cement planters so I masked off those bottom portions. You could also use the tape to add a decorative design(double creative points for that!).

Once your planters are ready and your work surface is set up fill your container with water. You want enough to keep space between the surface paint and the bottom of your container. If you are marbling a large pot you might want something deeper as you might dip further down while rolling.

Start adding your nail polish in random swirling patterns. You aren’t creating the “marble effect” yet but you do want your colors to overlap. I only used 3 different colors but using more or less is totally doable! One tip I read and actually found helpful is keeping the bottles close to the surface while pouring. This keeps your paint from hitting the surface too hard and just sinking to the bottom of the water.

When you have your colors overlapped pretty well and the surface is covered you can start swirling! This is insanely satisfying! You need to work fairly quick because the polish starts to set up pretty fast. I didn’t use a “quick dry” polish and I still had to work quick so I would skip those varieties if possible.

Once you have a pattern you like start rolling your planters over the surface. The polish will basically cling to the surface of your planters. You shouldn’t have to dip too far into the water although I double dipped (deeper and/or more shallow) just to test it out.

If you’re working with more translucent colors overlapping your rolls and dips can create a pretty cool effect but it doesn’t look as “traditional”. Also, if you choose to work with those types of polish be warned your planter(and its original color) will most likely show through. I had a couple areas where the yellows showed through but its part of my current color scheme so I was ok with it. I’d highly recommend doing a “tester” or starting with a planter your willing to love just a lil less(LOL!) until you get the hang of it.

If you’re really attached to your current manicure you may want to use gloves. Ive always been a bare handed painter and seem to have a different pallet in my palm after my DIYs… I cant be the only one!? I think it was easier to handle the planters without having the extra slip factor of gloves but again, to each his own! And if you to dive in sans gloves fear not, a little polish remover or acetone takes off any marbling remnants in just a few swipes. But just to be safe you might want a few paper towels on stand by.

In between rolls you’ll also want to clean the surface. Again, the paint sets up pretty quick so you should be able to pull any extras off in sheets. I waited maybe an extra 30 seconds and ran a toothpick over the surface to pick up the remnants.

Let your finished planters cure up for a day or at least overnight. If you have any areas masked off check a small section before removing. If any of the paint starts to peel up with the tape you can run a utility knife along the edge to get a clean pull. This only happened in one area for me and the paint was super thick in that section.

Now enjoy giving your old planters some new life! I’m completely obsessed and cant wait to marble some more items in our loft. Im sure I’ll be back shortly with more marbled projects!

Have you already jumped on the marble train? Done any notable planter DIYs? Tell me all about it in the comments!

DIY, living room, loft life

Throw Blanket Pillow Cases

July 7, 2017 5 Comments

This post includes affiliate links. For the full disclosure policy click here.

Throw pillows. Can you ever have enough? I think not! We have quite the collection throughout our home but the pile that lives on our couch really needed updating. Speaking of updating, the colors in our living room are all new for the loft which is so overdue. Ive been holding onto this color inspo board for sooooo so long and its finally getting used(YAY!). Only problem with that is finding pre-fab decor items in such punchy colors. So I’ve had to get extra creative and the throw blanket pillow cases were the perfect start!

As I said, the colors I picked(and LOVE!) are not ones I’ve been able to find right on the shelf in the items I need to replace. So when I found this cozy throw blanket at Target I snatched it up real quick. At first I thought I would just use it as a throw for couch snuggling and we did use it for a short time. But after trying and failing to find pillow cases in the right color I realized the throw was basically just a piece of fabric in the ideal shade.

Throw blanket pillow cases

After skimming a few tutorials on Pinterest I realized I could make these super basic and skip the time consuming details like zippers(double yay!). I love sewing. Really, I do. I’ve been doing it since I was a kid(thanks Mom!) and I’ve sewed everything from simple blankies to very detailed garments like my wedding dress. And as much as I appreciate intricate stitched items nothing beats the high of completing a project in 20 minutes! Yeah, you read that right! 20 minutes my peeps!

Throw blanket pillow cases

The very basics of my envelope pillow case: Trim off original rolled hem. Roughly measure enough fabric to cover pillows with 4″ overlap. Hem flap edges. Fold with right sides together so the hemmed edges overlap 4″. Stitch down both lengths. Turn right side out. Soooooo basic!

Throw blanket pillow cases

If you want to get really precise or if you are using a less forgiving fabric by all means to the math. Map out your cuts, iron your seams, and pin EVERYthing. I’m sure my old sewing teacher would recommend doing every single one of those steps! But! Being this fabric is a fleece with a stretch and it was going on slouchy pillows I skipped those deets and it all came out perfect. At least to my eye!

Throw blanket pillow cases

One thing I will recommend is a walking foot. My machine is older and I’m sure its not the most fancy attachment but it makes a difference. When I hemmed the flaps(literally eyeballed it and folded over as I went) I used the regular foot. But once I folded the fabric over itself and started sewing it shut I was going over 3 thick layers of fleece. The walking foot kept everything moving smoothly and I promise its worth switching out!

Throw blanket pillow cases Also, if you wanted to add a closure but still don’t want to deal with the hassle of a zipper a button would be perfect. Especially if it was something chunky, decorative, toggled, etc. Like I mentioned before, these pillows are super slouchy(which is why they’re so cozy!) so for now the envelope style sans closure is awesome. If I stumble upon a great decorative element later on I could still hand stitch it on. But for now these pillow cases are giving new life to our couch scene!

Throw blanket pillow cases

So have you repurposed any fabric lately? Cut up blankets for any other DIYs? You know I’d love to hear all about it in the comments!

bedroom, DIY, loft life

Lazy Gallery Wall

June 30, 2017 2 Comments

This post includes affiliate links. For the full disclosure policy click here.

Gallery walls are classic and I’ve used them somewhere in nearly every place we’ve lived! But all the measuring and math involved in the traditional way of hanging them is more work than I’m ever willing to do. Ever. Even the day I hung my thesis for our Senior Show I brought my paint stick(half this hack!) and finished hanging in minutes. And guess what? Not a single professor or photographer suggested any adjustments! So be lazy. Im giving permission. Ha! Or just consider yourself a bit more efficient because this guide to a lazy gallery wall will help get your art up in no time!

Lazy gallery wall

The wall beside our bed is totally basic but the space is open and perfect for something a bit oversized. After going through the stacks of canvases and framed photos we have left to hang I decided on a set I took in school. The photos are pieces of Q in his uniform a few years ago and they are still some of my absolute favorites. Plus, all the navy works perfect with our new palette! #winning

Ok, so the only measuring this requires is setting the mid-point. Which, I know(thank you art school) always gets placed at 58″ from the floor. I couldn’t tell you the science of why this is so esthetically pleasing but it works so I don’t mess with this measurement. This means the middle of your collection as a whole is placed at the 58″.

Lazy Gallery Walls

Once you find that midpoint(58″) slap a piece of painters tape up long enough to line your grouping. Use a tape the same width you want between your images since this is essentially your hanging guide. Add a piece that intersects your first guide at the horizontal midpoint(creating a T). Using a laser level to make sure these two pieces are well set and level. A little attention to detail on the first two will ensure the rest of the group is lined up well.

Lazy gallery wall

Use the old paint stick trick to hang your first frame. Start with the ones you want in the middle as you will be working your way out. This method of hanging makes it super easy to line up the edges of your frames with the tape guides. Once the first frame is set add your next piece of painters tape to the opposite side of the image(pictured). Again, these are your spacers! Continue working your way out and up. I promise your wall will come together in minutes. Really, minutes!

Lazy gallery wall

Before you pull the tape off your finished wall use a small amount of Blu-Tack to keep everything in place. Blu-Tack is a repositionable adhesive that will keep your frames perfectly lined up without leaving any residue on your paint or holes in your drywall. This really keeps your frames tightly lined up and it only takes a few seconds to place a dab behind each frame.

Lazy gallery wall

When everything is set simply peel off that painters tape(so gratifying!) and enjoy your perfectly placed gallery wall!

Lazy gallery wall

So have you installed a gallery wall lately? Used any tricks for hanging quickly? Tell me all about it in the comments!

bedroom, before & after, DIY, loft life, upcycle

Painted Fabric Chair

June 23, 2017 13 Comments

This post includes affiliate links. For the full disclosure policy click here.

The Original Chair

We bought this chair from a Habitat For Humanity ReStore for dirt cheap. It was a total goldilocks scenario since the chairs that are most comfortable for me are rarely comfy for Q. But, by some miracle, this one fit us both! Only problem was the color. It was a really unattractive mauve with green dots and that just wasn’t going to work with everything else in our place. We bought the chair thinking we were going to reupholster it but quickly decided that was entirely way too much work. After a bit of research I planned on painting it… and then a whole year and a 3,000 mile move happened. Ha! Since I was getting down to business with the decor in the loft it was time to finally tackle the ugly pink chair. Luckily this painted fabric chair turned out better than even I expected.

Painted Fabric Chair

The Solution

See, if you search painted fabric chair(or furniture) you will get a ton of results and nearly all of them are done just a bit differently. Being that I’ve never painted any fabric furniture I just wanted to make sure two things happened. First, I wanted the fabric to stay soft and pliable. I mean whats the point of a comfy upholstered wingback chair makeover if it ends up a stiff mess? No point! Second, I wanted full coverage on that awful pink color! Side note: if this color is your jam and you make it work in your house more power to ya! But this is just simply not the case in the loft.

The Steps

After pulling from a handful of tutorials I did the following to get some pretty fab results:

-Vacuum the chair thoroughly(esp. all those nooks and crannies!).

-Mix 1 part fabric medium with 2 parts interior paint.

-Spray the area you are painting with a light mist of water.

-Use a stiff brush to paint light coats over the entire chair. A smaller bristle brush is also helpful to get into all the creases and corners.

-Sand the surface in between coats(once completely dry) with fine grit sandpaper.

Painted Fabric Chair

[After the first coat. Yes, it looks patchy and scary but just keep painting!]

Now comes the fun part! If your chair has a distinct texture like ours you can layer your paint to keep the textured design. This idea came to me after sanding the first layer. Because the sanding is what keeps the chair from getting stiff you always end the layer with sanding. This will expose a layer below the current top layer of paint and in doing so you will also accentuate any raised pattern or texture in the fabric.

Painted Fabric Chair

I started with a couple coats of classic silver and hand tinted the paint for the remaining layers. I went darker by adding a couple ounces of black paint which I measured out on a scale (so I could replicate it if need be). Once the final coat dried and I sanded it down the texture really popped. And still no sign of the ugly pink!

The Results

Painted Fabric Chair

[before & after sanding]

Painted Fabric Chair

This does add a more rustic or even shabby chic feel(which isn’t typically us) but in this space its going to fit right in! All the wood in our bedroom is raw or unfinished so another perfectly imperfect piece is totally making us happy!

Painted Fabric Chair

So have you painted a fabric chair? Or any other fabric furniture? You know I’d love to hear all about it in the comments!

bedroom, DIY, plant lady

Copper Pipe Plant Stand

June 19, 2017 1 Comment

This post includes affiliate links. For the full disclosure policy click here.

I recently saw a meme that read: plant lady is the new cat lady. First, I think this is hilarious. Second, Im absolutely on a path to crazy plant lady. I love my plants and our loft is slowly being converted to jungle status. No regrets! But having all these plants and pots around the house means I’ve searched and shopped just about every plant stand I can. I’ve bought a few locally, ordered a few online, scavenged a few, and now of course Im starting to DIY a few. And I started with this awesome copper pipe plant stand.

When we moved this last time we had a LOT of supplies left over from our home renovation. Some items we gave away, others we have been able to sell, and still others are lingering. This was the case with the copper pipes. We had 2 lengths of pipe left over from a water heater project and I’ve been waiting for the right DIY project to use them up. Which is how these two dilemmas came to be the perfect solution: copper pipe plant stand!

If you search Pinterest for plant stand DIYs you will find them made out of every material imaginable. But after reading through a couple pipe specific tutorials I kept coming up with the same issue…. no one uses the the entire lengths of pipe! This seemed nuts to me so I adjusted the measurements slightly and came up with two plant stand sizes that both use the entire 5 foot lengths of pipe.

Copper pipe plant stand

Each plant stand requires:

-1 5ft length of pipe

-8 tees

-8 caps

–Glue(optional)

I measured, marked and cut the following lengths:

For the original stand:

-4 pieces 2” for inner frame

-4 pieces 2.5″ for outer frame

-4 pieces 3″ for top support

-4 pieces 7.5″ for legs

For a taller/slimmer stand:

-4 pieces 2″ for inner frame

-4 pieces 2″ for outer frame

-4 pieces 3″ for top support

-4 pieces 8″ for legs

Once everything was cut I simply connected the pieces with tees and added the caps to the ends. I read a couple tutorials that used glue or crimping tools to keep everything together but my pipes and fittings were pretty tight already so I skipped this step. Obviously if the fittings are loose or separate easily using a bit of glue is necessary. Lastly, I polished the whole stand with a cotton rag and a mix of lemon and salt. This mix really brought a shine back to the copper and helped remove the last bits of sticker residue. With the stands polished they are right at home with all the rose gold in the rest of the bedroom.

The measurements for this DIY can be rearranged and adjusted to accommodate any pot size and/or pipe length which is super convenient! Once you get the basic shape of this down I promise you will start thinking of other possible versions! So what plant stands are you loving at the moment? Have you gone DIY on your plant stands yet? You know I’d love to hear all about it in the comments!

« Previous 1 2 3 4 Next »