This post includes affiliate links. For the full disclosure policy click here.
We bought this chair from a Habitat For Humanity ReStore for dirt cheap. It was a total goldilocks scenario since the chairs that are most comfortable for me are rarely comfy for Q. But, by some miracle, this one fit us both! Only problem was the color. It was a really unattractive mauve with green dots and that just wasn’t going to work with everything else in our place. We bought the chair thinking we were going to reupholster it but quickly decided that was entirely way too much work. After a bit of research I planned on painting it… and then a whole year and a 3,000 mile move happened. Ha! Since I was getting down to business with the decor in the loft it was time to finally tackle the ugly pink chair. Luckily this painted fabric chair turned out better than even I expected.
See, if you search painted fabric chair(or furniture) you will get a ton of results and nearly all of them are done just a bit differently. Being that I’ve never painted any fabric furniture I just wanted to make sure two things happened. First, I wanted the fabric to stay soft and pliable. I mean whats the point of a comfy upholstered wingback chair makeover if it ends up a stiff mess? No point! Second, I wanted full coverage on that awful pink color! Side note: if this color is your jam and you make it work in your house more power to ya! But this is just simply not the case in the loft.
After pulling from a handful of tutorials I did the following to get some pretty fab results:
-Vacuum the chair thoroughly(esp. all those nooks and crannies!).
-Mix 1 part fabric medium
-Spray the area you are painting with a light mist of water.
-Use a stiff brush
-Sand the surface in between coats(once completely dry) with fine grit sandpaper
[After the first coat. Yes, it looks patchy and scary but just keep painting!]
Now comes the fun part! If your chair has a distinct texture like ours you can layer your paint to keep the textured design. This idea came to me after sanding the first layer. Because the sanding is what keeps the chair from getting stiff you always end the layer with sanding. This will expose a layer below the current top layer of paint and in doing so you will also accentuate any raised pattern or texture in the fabric.
I started with a couple coats of classic silver and hand tinted the paint for the remaining layers. I went darker by adding a couple ounces of black paint which I measured out on a scale (so I could replicate it if need be). Once the final coat dried and I sanded it down the texture really popped. And still no sign of the ugly pink!
[before & after sanding]
This does add a more rustic or even shabby chic feel(which isn’t typically us) but in this space its going to fit right in! All the wood in our bedroom is raw or unfinished so another perfectly imperfect piece is totally making us happy!
So have you painted a fabric chair? Or any other fabric furniture? You know I’d love to hear all about it in the comments!
This post includes affiliate links. For the full disclosure policy click here. When we first made…
This post includes affiliate links. For the full disclosure policy click here. If you've ever remodeled,…
Happy Thanksgiving to all our readers! We are so thankful to have this little corner…
This post includes affiliate links. For the full disclosure policy click here. Often times as creative…
This post includes affiliate links. For the full disclosure policy click here. A big part of…
This post includes affiliate links. For the full disclosure policy click here. Todays DIY project is…
View Comments
Love the new color of the chair! It looks so good. I had no idea you could paint it. Seems much easier than having to refabric it.
Thanks Liz! IMO it was absolutely easier than a traditional reupholstery job!
I never knew you could paint a chair with fabric like that! Such a good idea! Thank you for sharing :) xoKitty
Thank you Kitty! So glad you liked it!
Beautiful transformation! I found a chair just like this one at Goodwill, however, it has a few imperfections on the cloth. How do I repair those areas before painting?
Thank you! What kind of imperfections are you trying to repair?
This looks fantastic! I have a chair the same style that I'm now inspired to piant 😊. Quick question, how much paint/ medium did you use in total do you think?
Thanks Jo! I only used half the pint of paint and 2 bottles of medium.
How is it for use? Can it be used regularly or is it strictly decor? I have a chair I’d like to put in my living room, so it will get used.😊
Its great! This was in the corner of our master for a looooong time and I loved to use it as my reading chair. I think the key to keeping the fabric soft and comfy is sanding and the fabric medium. Plus it gets broken-in the more you use it ;D
The chair looks great. I bought 4 chairs for $5 apiece and am going to paint them too it's my next project. Thanks for the tip about the sanding in between coats. I was kinda leery about all the tutorials being so different especially the ones that was them as the final step. Again great tutorial and love the color
Sorry auto correct changed wax to was. Final step I've seen was waxing the chair
Do you spray with water before all coats?